Mount Vernon Forklift Training Schools

Marysville Forklift Training Schools - Have An Efficient And Safe Work Area With Our Forklift Training Schools

Are you searching for work as a driver of a forklift? Our regulatory-compliant mobile equipment operator training provides instruction in kinds of forklifts, pre-shift inspection, fuel kinds and handling of fuels, and safe use of a forklift. Hands-on, practical training helps participants in obtaining basic operational skills. Course content comprises existing rules governing the use of forklifts. Our proven forklift Schools are meant to offer training on these types of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

Do not lower or raise the fork when the lift truck is moving. A load should not extend above the backrest because of the possibility of the load sliding back in the direction of the operator. Check for overhead obstructions and ensure there is sufficient clearance prior to raising a load. Stay away from overhead power lines. When the load is lifted straight up, tilt it slightly back.

The lift truck is less steady if a load is in a raised position. Make sure that no body ever walks below the elevated fork. The operator must not leave the forklift while the load is lifted.

The forks should be level when handling pallets, and high enough to extend all the way into and underneath the load. The fork's width should provide equal distribution of weight.

Prior to unloading or loading the truck, chock the wheels and set the brakes. Floors need to be strong enough to support the weight of the load and the forklift combined. Fixed jacks can be installed to support a semi-trailer that is not coupled to a tractor. The height of the entrance door should clear the forklift height by a minimum of 5 cm. Mark edges of rail cars, ramps or docks and avoid them.

Click to Download the pdf