Mount Vernon Forklift Training School

Marysville Forklift Training School - Forklift Training School And What It Really Has To Provide - Federal and industry regulators have established the criteria for forklift safety training based on their existing standards and regulations. Those wanting to use a forklift should finish a forklift training program before working with one of these machinery. The accredited Forklift Operator Training Program is intended to provide people training with the information and practical skills to become an operator of a forklift.

There are forklift operation safety rules which should be followed pertaining to pre-shift inspections, and regulations for lifting and loading.

An inspection checklist must be done and given to the supervising authority prior to beginning a shift. When a maintenance issue is uncovered, the use of the specific machine must be discontinued until the issue has been addressed. To indicate the machine is out of service, the keys should be removed from the ignition and a warning tag placed in a visible spot.

Safety rules for loading will consist of checking the load rating capacity on the forklift to know how much the equipment could handle. When starting the machine, the forks must be in the downward position. Remember that there is a loss of approximately one hundred pounds carrying capacity for every inch further away from the carriage that the load is carried.

Lifting should begin with the driver moving to a stopped position approximately three inches from the load. The mast must then be leveled until it has reached a right angle with the load. Raise the forks to an inch beneath the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to alert other employees. Never allow forks to drag on the ground.

Click to Download the pdf